Bike Fit & Installation

In this video we will be showing how to install the MORF Tech Bars.
 
Fit-stack-05.JPG

Pad Width and Height

3 pad widths are available.

5 risers are provided with spacing of 3, 10, 15, 20, 25 mm.  The drawing above shows the height and width adjustments available with the bar.  Arm Rests can be bolted directy to the bar providing an 18 mm pad height from stem center line.

 Arm Pads can be mounted directly to the bar for a lower arm rest position.

Arm Pads can be mounted directly to the bar for a lower arm rest position.

Pad Distance Adjustment

In addition to pad with, the pads can be adjusted forward / back in 4 each 16 mm increments.


Fit-stack-10.JPG

Extension Length

The overall extension length can be adjusted by cutting the straight or 35 degree bend (depending on the configuration ordered).

Pad Angle - The pad angles can be adjusted plus or minus 10 degrees.  The allows the bars to be tilted up in the stem but leaving the arms flat.


MORF-Fit-Sheet-01.JPG